Autonics krn100 series - FILE;MEMORY SETUP(File;Memory setting)

8 Parameter detail setup
© Copyright Reserved Autonics Co., Ltd. 119
8.8 FILE/MEMORY SETUP(File/Memory setting)
You can set the parameter about parameter set file and storage data.
Move to FILEMEMORY SETUP with , keys, press key to enter
FILE/MEMORY SETUP.
 Parameter list
Parameter
Setting range
Factory default
Load Set File (Open parameter setting file)
None, Default.pms, User1.pms, User2.pms,
User3.pms, User4.pms, User5.pms,
User1.pms(USB), User2.pms(USB),
User3.pms(USB), User4.pms(USB),
User5.pms(USB)
None
Save Set File (Save parameter setting file)
None, Default.pms, User1.pms, User2.pms,
User3.pms, User4.pms, User5.pms,
User1.pms(USB), User2.pms(USB),
User3.pms(USB), User4.pms(USB),
User5.pms(USB)
Select ...
Memory Status (Memory capacity)
0% to 100%(display range)
0%
Memory Clear (Delete memory) Cancel ↔ All Clear Clear ...
USB LogData Save (USB storage function)
Enable
↔
Disable
Disable
Memory Save Option (Memory storage option)
Overwrite ↔ Stop
Stop
USB Memory Copy/Move (Move/Copy data)
-
USB Copy/Move ...