Autonics krn100 series User Manual

8 Parameter detail setup
94 © Copyright Reserved Autonics Co., Ltd.
Enter “ipconfig” at “Open” in Run dialog box and you can check IP address of PC.
Set KRN100 Ethernet Port(Use Ethernet communication) as ‘Enable’ at
COMMUNICATION SETUP (
Communication setting) of KRN100. Set IP Address(IP
address) as installation environment.
PC KRN100
IP Address 192.168.1.1 192.168.1.2
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.1
IP address set for Modbus TCP communication is complete.

Autonics krn100 series Specifications

General

Brand	Autonics
Model	krn100 series
Category	Measuring Instruments
Language	English