Class configurations
The
configurations that are done for a class-map can be verified by the show qos chassis
policy-map [policy-name] class-map [class-name] command. After mapping the
policy-map to an interface, the configurations for the instantiated classes on the interface can
be verified by show qos chassis [interface-type] [interface-name] class
[class-name] [inbound/outbound]. These commands will list all the configurations that
are done on the class such as CBQ, Policing, RED parameters. The show command for
interface class will also display the statistics of that class, such as packets forwarded, packets
lost and policing statistics.
Chassis QoS troubleshooting
Troubleshooting August 2013 233
To Next Page
Loading...
