Table 6: Variable definition
Variable Value
<listname> The access list name.
Example
SR# debug pcap access-list acl1
debug pcap max-sessions
Use this command to configure the number of simultaneous packet capture sessions
allowed.
Syntax
[no] debug pcap max-sessions <1-10>
Example
SR# debug pcap max-sessions 6
debug pcap enable
Use this command to enable or disable all configured packet capture sessions.
Syntax
[no] debug pcap enable
Example
SR# debug pcap enable
debug pcap cleanup
Use this command to delete all packet capture sessions, related statistics and data
structures.
Syntax
debug pcap cleanup
Example
SR# debug pcap cleanup
debug pcap upload
Use this command to upload captured packets to a remote host.
Global troubleshooting tasks
36 Troubleshooting August 2013
Comments? infodev@avaya.com
To Next Page
Loading...
