Syntax
[no] debug pcap upload <X.X.X.X> <name> <username> <password>
Table 7: Variable definition
Variable Value
<name> The filename to store as.
<password> The password to access the server.
<username> The username to access the server.
Example
SR# debug pcap upload 10.10.10.1 testcap testuser testpass
debug pcap save
Use this command to save the packets captured.
Syntax
[no] debug pcap save [local <filename>] [network <address> <path>]
Table 8: Variable definition
Variable Value
<address> The network address.
<filename> The filename to save as.
<path> The path and filename for network storage.
Example
SR# debug pcap save local pcapinfo.log
debug pcap show-config
Use this command to display packet capture configurations.
Syntax
[no] debug pcap show-config
Example
SR# debug pcap show-config
Packet capture
Troubleshooting August 2013 37
To Next Page
Loading...
