119
5.7 System
Change general system information such as date, time and region, edit passwords and permissions,
and more.
5.7.1 General
System Name: Enter the desired name for your NVR. The name can include both letters and numbers.
Device ID: Enter the desired ID for your NVR. The device ID is used to identify the NVR, and can only be
composed of numbers. For example, 2 piece NVRs are installed in the same place, the Device ID is 000000
for one of the NVRs, and 111111 for another NVR. When operating the NVR with a remote controller, both of
the NVRs may receive the signal from the controller and act at the same time. If you want to control only
the NVR with ID 111111, you can input the Device ID 111111 on the login page with the remote controller for
further operations. -X
Language: Select a language you would like the system menus to be displayed in. Multiple languages
are available.
Video Format: Select the correct video standard for your region.
Auto Log-out: Click the drop-down menu to select the time your NVR will exit the Main Menu when idle.
You can also disable this by selecting “OFF” (password protection will be temporarily disabled).
Web Session Timeout (min): -X
Show Wizard: Click the checkbox if you would like to display the Startup Wizard each time you turn on or
reboot your NVR.
5 NVR System Setup
5.7.1.1 General
To Next Page
Loading...
