49
Notice:
1.
The region for detection can not be in an area people cannot reach.
2.
The detected people should be completely surround in the region.
5 NVR System Setup
5.4.1.3 ID (Intrusion Detection)
The Intrusion Detection function detects people, vehicles, or other objects which enter and loiter in a
pre-dened virtual region, and some certain actions can be taken when the alarm is triggered.
Enable: Enable or disable the ID function.
Sensitivity: The sensitivity level is from 1 to 4. Higher sensitivity will trigger the detection easier.
Click [Settings] to draw a virtual region in the camera picture.
To Next Page
Loading...
