126
Log Searching and Backing Up:
1. Click the eld next to Start Date and Start Time to choose the starting date & time for your search
from the on-screen calendar.
2. Click the eld next to End Date and End Time to choose the end date & time for your search from the
on-screen calendar.
3. Select the type of events you would like to search for from the dropdown next to Log Type, or select All
to see the entire system log for the selected time period.
4. Click Search.
5. Browse system log events from your search period.
• Video events can be played back instantly by clicking in the Playback button. Right-click to return
to your search results.
• Use the / buttons in the bottom-right corner of the menu to move between pages of
system log events.
6. Click Backup to create a backup of the system log for your search period. Please make sure your ash
drive has been connected to the NVR’s USB port.
7. The backup drive menu appears. Navigate to the folder you want the backup le to be saved in, then
click OK to begin.
5.7.3.2 Load Default
Reset the NVR settings to its out-of-box state. You can choose to reset all settings at once, or just settings
on specic menus. Restoring default settings will not delete recordings and snapshots saved to the hard
drive.
Check the items you want restored, or check Select All to choose all items. Click Apply to load default
settings of your chosen items.
5 NVR System Setup
To Next Page
Loading...
