120
5.7.1.2 Date and Time
Date & Time
Date: Click the calendar icon to change the date.
Time: Click the dialogue box to change the time.
Date Format: Select the preferred date format.
Time Format: Select the preferred time format.
Time Zone: Select a time zone relevant to your region or city.
5.7.1.3 NTP Settings
The NTP (Network Time Protocol) function allows your NVR to automatically sync its clock with a
time server. This gives it the ability to constantly have an accurate time setting (your NVR will periodically
sync automatically)
Check to enable the NTP, and select a Server Address, click Update Now to manually sync the date &
time.
Click Apply to save your settings.
When the NTP function is enabled, system will update the system time at 00:07:50 per day, or every time
the system starts up.
5 NVR System Setup
To Next Page
Loading...
