73
5 NVR System Setup
Congure the face attribute alarm function here.
Camera: Camera name
Alarm Type: Set up face attribute detection type,there are three kinds of detection type. Close, No Mask,
Wear Mask.
Buzzer: NVR/DVR internal buzzer. You can set the buzzer duration time (in seconds) for triggering a face
attributes alarm.
Alarm out: Check the external alarm device when the pedestrian and vehicle alarm is triggered.
Delay: set the duration of triggering the external alert devices (10s, 20s, 40s, and 60s).
Record: Click icon,select the channel to record when triggering pedestrian and vehicle alarms.
Duration:set the duration of continuous NVR/DVR recording after the event occurs. The suggested record-
ing time is 30 seconds, but can be set to up to 5 minutes.
Show Message: Select this box to show icon when face attendance alarms are detected.
Send Email: DVR send an automatic email when face attendance alarms are detected.
FTP Picture Upload: To upload alarm images to FTP server when an alarm is triggered. To enable FTP,
please view 5.4.4 FTP.
FTP Video Upload: To upload alarm video to FTP server when an alarm is triggered. To enable FTP, please
view 5.4.4 FTP.
Picture to Cloud: To upload alarm images to Cloud server when an alarm is triggered. To enable Cloud,
please view 5.5.2 Cloud.
Video to Cloud: To upload alarm video to Cloud server when an alarm is triggered. To enable Cloud,
please view 5.5.2 Cloud.
Full Screen: If this feature is enabled and face attendance are detected in the channel, you will see the
channel in full-screen mode.
Voice Prompts:Voice prompt, when the alarm is triggered, the audio le is imported by the voice prompt
(the IPC needs to support the voice prompt function), Please view in 5.3.7 Voice Prompts
5.4.3.3 License Plate Recognition
When license plate added in the group were detected,it’ll be a series of alarm settings.
To Next Page
Loading...
