AVYCON DIVERSITY - Load Default Settings for IP Camera; Reboot IPC

130
5 NVR System Setup
1. Choose one of the IP cameras you want to upgrade rmware.
2. Click Select File to select the update le from your USB ash drive, then click OK.
3. Click the IPC Upgrade button to start upgrading. You will be required to input the Admin
password to authenticate. Please do NOT power o the NVR, IP camera, or remove
the USB during the upgrade.
5.7.4.2 Load Default Settings for IP Camera
1. Choose the IP cameras you want to restore.
2. Click Load Default to restore settings. You will be required to input the Admin password
to authenticate.
5.7.4.3 Reboot IPC
Select the IP camera you wish to reboot.