Baker Hughes Apollo 3 - Quick Start Parameters for Vector Plus and Vector VII Applications

Copyright 2020 Baker Hughes Company. All rights reserved.
Page 15 of 277
Table 1: Quick Start Parameters for Vector Plus and Vector VII Applications
Parameter Name
Default
Information
Date and Time
None
Set the time zone, date, and time.
Use the Left and Right Arrow
buttons to select a digit to change.
Use the Up and Down Arrow
buttons to change a value. Use
the F1 and F5 function buttons to
navigate between screen fields.
Well Name
Blank
Well Name. Up to 15 characters.
Use the Left and Right Arrow
buttons to move the insert
location. Use the Up and Down
Arrow buttons to change the letter
to the right of the insert position.
Note that Apollo supports USB
Keyboards which simplifies text
entry.
Site Name
Blank
Up to 15 characters. Use the
Left and Right Arrow buttons to
move the insert location. Use the
Up and Down Arrow buttons to
change the letter to the right of the
insert position. Note that Apollo
supports USB Keyboards which
simplifies text entry.
DriveMaxVolts
480 Volts
Vector Plus Drive output voltage
when running at Maximum
Frequency. Usually set to the
drive power source voltage.