Figure 203: Setup Pump Curve Wizard
Viscosity compensation using Pump Curve Interpolation (on pumps with viscosity curves available)
and the Hydraulic Institute viscosity compensation calculations can be enabled in the wizard.
Viscosity compensation is in field test at this time and should be considered a “beta” function.
After the Wizard is complete, the Pump Curve Setup menu will appear as shown in Figure 204: Pump
Curve Setup Menu, page 248.
See the wizard information above for details on the parameters.
Pump Thrust Limits are adjusted by selecting the Pump Thrust Limits option on this screen.
To Next Page