Baker Hughes Apollo 3 - Change the Drive State Automatic Screens; Automatic Screens

Copyright 2020 Baker Hughes Company. All rights reserved.
Page 175 of 277
Figure 145: Add the Motor Underload Limit To The Level 1 Settings Rotation-Screen 5
5.19 Change the Drive State Automatic Screens
Automatic screens are displayed without user interaction when the drive changes states. By default, the
automatic screens are:
Table 42: Automatic Screens
Drive State
Automatic Screens
Comms (with drive chassis) bad
Home Screen
Locked Out
Error Mode screen
Fault
Error Mode screen
Ready
Home Screen
Ready-Manual
Home Screen
Restart
Error Mode screen (shows countdown)
Prepare2Start
Blank-No screen assigned
Starting
Home Screen
Running
Home Screen
Run Mode 2
Home Screen
Run Mode 3
Home Screen
Stopping
Blank-No screen assigned