Baker Hughes Apollo 3 - 10.2 Basic Trigger Settings

Copyright 2020 Baker Hughes Company. All rights reserved.
Page 227 of 277
• Intake Pressure Low Trigger-Stops the motor if the downhole pump intake pressure is less than the
trigger limit.
Figure 197: Rigger Logic Flowchart
10.2 Basic Trigger Settings
Table 57: Basic Trigger Settings
Item
Description
Name
Name of the trigger. When naming a trigger, use a
name that describes the condition when the trigger
is SET such as Tank Level Hi. Trigger names
cannot exceed 15 characters.
Trigger Type
The type of trigger. The Trigger Type determines
the condition that causes the trigger to be activated
(SET). The Trigger Types are described below.