•
Restart Delay
•
The trigger can be disabled (Not In Use) or enabled using the On/Off function button.
•
The Trigger Name can be edited using the Rename function button.
Figure 198: Trigger Info-Screen 2
Edit Trigger Screen
Only available to Level 3 (Advanced) users.
All trigger parameters can be edited from this screen.
•
Trigger Name
•
In Use (trigger enabled/disabled)
•
Trigger Limit
•
Enabled States
•
Enable Delay
•
Trigger Action
•
Restarts Allowed
•
No Log on Clear – check this box if you don’t wish for the trigger to be logged when it transitions from
Set to Clear.
•
Restart Delay
•
Restart Delay Start
•
Trip Delay (Set)
•
Trip Delay (Clear)
To Next Page