3.7.1
Level 1 Users “Logged-out”
The lowest level of privilege in the Apollo system is Level 1. This level is designed for operators
who need to run the drive and monitor its performance but are not trained to configure the
drive. Level 1 users are not required to log in.
Level 1 users have the following permissions:
•
View data on a limited number of data display screens
•
View the Event Log and Relevant Triggers screens
•
View graphical data associated with the parameters displayed on a data display screen
•
Make very limited changes to the system operation. The system changes allowed in the
default configuration are:
–
Start the drive
–
Stop the drive
–
Adjust the drive speed setpoint
–
Select the drive display color scheme
•
Collect historical data and events on a USB Flash drive
3.7.2
Level 2 Users “Logged-in”
Level 2 access requires a login. This level is designed for service personnel who need to setup
the drive at installation or modify the drive’s configuration to optimize its performance. Many of
the information screens are simplified at this level in comparison to Level 3 Users.
Level 2 users have the following permissions:
•
All Level 1 permissions
•
View all data display screens
•
View all Trigger screens
•
Access configuration menu
•
Configure the drive
3.7.3
Level 3 Users “Advanced”
Level 3 access requires a login. This level is designed for experts who need to add functionality
to the drive.
Level 3 users have the following permissions:
•
All Level 2 permissions
•
Advanced editing of Channels and Triggers
To Next Page
Loading...