Baker Hughes Apollo 3 - Page 240

Copyright 2020 Baker Hughes Company. All rights reserved.
Page 240 of 277
Table 64: Internal Triggers (cont'd.)
Trigger Number
Trigger Name
Description
206
IO Mod ComFail
Com Failure with RSTi IO
Module
219
Self-Stop
The drive (or motor) has
stopped without being
commanded to do so.
220
Self-Start
The drive (or motor) has
started without being
commanded to do so.
221
Remote Start
Motor was started by SCADA
or Remote User.
222
Manual Start
Motor was started manually.
223
Rst Timer Start
Motor was started by
auto-restart timer.
224
Triggered Start
Motor was started by a trigger.
225
Start Failed
The drive (or motor) failed to
start after being commanded
to do so.
226
Stop Failed
The drive (or motor) failed to
stop after being commanded
to do so.
228
Any Warning
A Warning (LOG->NO
START) trigger is SET.
229
Group Shutdown
Motor was stopped by SCADA
Group Shutdown Command.
230-240
System State
See table below.
244
PwrFail SysStop
The System was shut down
by power failure.
245
Warm Start
The System was restarted
with memory retained.
246
Cold Start
The System was restarted
with Event Logs and History
erased.
247
Any Fault
A fault caused the motor to
be stopped. Latched until
cleared.