Becker MEXICO - Page 144

144
Internet (WAP) function
X Select the required connection type
*356, ,6'1 or $QDORJXH.
X Turn the rotary control/push button
to activate the required time ( ).
Provider phone number
(for
,6'1 and $QDORJXH connection types
only)
Here you can enter the provider’s phone
number (dial-up number).
X Select the &DOOQXPEHURI,63 entry.
The input menu appears.
X Enter the information.
APN (Access Point Name
(for the
*356 connection type only)
Here you can enter the APN name.
X Select the $31$FFHVV3RLQW1DPH entry.
The input menu appears.
X Enter the information.
User name
Here you can enter the username.
X Select the 8VHUQDPH entry.
The input menu appears.
X Enter the information.
Password
Here you can enter the password.
X Select the 3DVVZRUG entry.
The input menu appears.
X Enter the information.
Proxy IP address
Here you can enter the proxy IP address.
Note:
With an active data connection via
*356, both incoming and outgoing tele-
phone calls are possible. With the
,6'1
and $QDORJXH connection types, no tele-
phone calls are possible when a data
connection is active.
5251
5238
5238
5204
Notes:
• An IP address consists of four digit
groups with three digits in each. A
digit group must always contain three
digits. If necessary, enter leading ze-
ros.
• The unit uses WAP 2.0 and requires a
WAP proxy. A WAP gateway (with
port number 9201) cannot be used.
Changing the predefined values for
3UR[\,3DGGUHVV and 3UR[\,3SRUW is not
recommended.
5239