Ensure sufficient air circulation is provided around the inverter when it is installed. If the inverter is to
be installed inside a panel, enclosure, or cabinet rack, carefully consider the position of the inverter’s
cooling fan and the ventilation louver. The cooling fan must be positioned to efficiently transfer the
heat generated by the operation of the inverter.
If you are installing multiple inverters in one location, arrange them side-by-side and remove the vent
covers. Use a flat head screwdriver to remove the vent covers. Only the H2 inverters rated for up to 30
kW may be installed side-by-side.
To Next Page
Loading...
