<The Time Chart for the Exception Day>
Connection settings for Time Period and Time Event
There are 8 Time event modules in the Time Event function. The parameters for T-Events 1–8 are
used to set the connections to each module for the Time Period and the Exception Date. The
parameters for T-Event 1–8 are used to specify the operation on particular days. Each Time event
module can be set for the connections to 4 Time period modules and 8 Exception days. Time
event modules are set as a bit unit in the parameters for Events 1–8. The diagram below shows the
connections between the Time event modules and the time period modules. The Time Event 1 is
connected to Time Period 4. The Time Event 8 is connected to Time Periods 1–4 and the
Exception Dates 2.
To Next Page
Loading...
