BENSHAW RSi H2 Series - Maintenance

Communications
340
890053-00-02
10.5.3.5 Error Code
Defined Codes
Description
00
The device has been reset. Currently waiting for the ‘Identity Yourself’
command.
01
Undefined command
02
Checksum error has occurred.
03
Data size exceeded the input buffer (message is bigger than the device
buffer size).
05
Data field error (input message size does not fit the command type)
10
Invalid data (message value is out of the range)
11
Invalid command for data type (command does not fit the message frame)
12
Command is not accepted (device has ignored a command due to a
fault. The master device sends a ‘Status Update Request’).