Remove Cable Guide
(
①
) Push and hold the levers on both sides of the cable guide and then
(
②
) remove the
cable guide by pulling it directly away from the front of the inverter.
In some models (50 HP ~ 125 HP, 37 kW ~ 90kW) the cable guide is secured by a bolt. Remove the bolt
first.
240V: 7.5 HP ~ 25 HP (5.5 kW ~ 18.5 kW) 240V: 30 HP ~ 60 HP (22 kW ~ 45 kW)
480V: 7.5 HP ~ 40 HP (5.5 kW ~ 30 kW) 480V, 575V: 50 HP ~ 125 HP (37 kW ~ 90 kW)
575V: 7.5 HP ~ 40 HP (5.5 kW ~ 30 kW)
Connect the cables to the power terminals and the control terminals. For cable specifications, refer to 1.5
Cable Selection on page 14.
To Next Page
Loading...
