2-38
Confidential
Print Unable 08 Turn the power off and
then back on again.
An error occurred in the internal
temperature sensor.
0800 2-45
Print Unable 09 Turn the power off and
then back on again.
Detected irregular power supply
for more than 100 times.
0900 2-46
Print Unable 0A Turn the power off and
then back on again.
Main PCB detected the main fan
failure.
0A02 2-46
Print Unable 0B Turn the power off and
then back on again.
An error occurred in the high-
voltage power supply PCB ASSY
during the operation.
0B01 2-46
An error occurred in the high-
voltage power supply PCB ASSY
when the machine was in the
ready state.
0B02 2-46
Print Unable 17 Turn the power off and
then back on again.
Detected a TT fan failure.
1701 2-47
Print Unable 18 Turn the power off and
then back on again.
A communication error occurred
between the main PCB and T2LT
control PCB.
1801 2-47
A communication error occurred
between the main PCB and T3LT
control PCB.
1802 2-47
A communication error occurred
between the main PCB and T4LT
control PCB.
1803 2-47
A communication error occurred
between the main PCB and TT
control PCB.
1808 2-47
Print Unable 19 Turn the power off and
then back on again.
Detected a TT motor failure.
1901 2-48
Print Unable 1A Turn the power off and
then back on again.
A communication error occurred
between the main PCB and MX
control PCB.
1A01 2-48
Print Unable 1B Turn the power off and
then back on again.
Detected an MX motor failure.
1B01 2-48
Print Unable 38 Turn the power off and
then back on again.
A temperature error occurred in
the external temperature/humidity
sensor.
3801 2-49
Print Unable 8B Turn the power off and
then back on again.
Detected that the TT was not
turned ON.
8B01 2-76
Print Unable C1 Turn the power off and
then back on again.
Failed to save data to a USB flash
memory.
C100 2-81
Print Unable E0 Turn the power off and
then back on again.
An error occurred at the ROM
check sum in the firmware.
E000 2-82
Error message
Description
Error
codes
Refer
to:
First line Second line