C8000 Battery Testing System User Manual
3 Cadex BatteryLab 91
if the Auto Connect on BatteryLab Startup option is enabled in IP
Address Manager’s settings.
Disconnect: BatteryLab disconnects from the active C8000.
Test Battery: Starts a test on a battery for the active channel of the
C8000.
Results: Short Cut to the Results window.
Data Monitor: Displays a log of system activity between the PC
and the C8000s.
Alerts Window: Displays any warning or error condition, which
BATLAB or a C8000 has reported.
Suspend Program: Suspend a program that is running, on the
selected channel of the C8000.
Resume Program: Resume a program that has been suspended on
the selected channel of the C8000.
Abort Program: Aborts a program that is running on the selected
channel of the C8000.
Real-Time Status: View the real-time statuses for the selected C8000
channel.
Set Clock: Sets the computer’s clock for one or all C8000s.
Set Options: Sets the system options for the selected C8000 or all
C8000s.
External Device Info: Retrieves the model information for the
supported external devices that are currently connected to the
selected C8000.
System Info: Retrieves the system information for the selected
C8000.
Exit. Select the Exit menu item to close the BatteryLab application.
The Tools Menu
Click the Tools menu to see the Tools menu. The Tools menu
contains three menu items, as follows:
Report Templates: Displays the Report Template window to create
report templates.
BatteryLab Configuration: Displays BatteryLab Configuration
window; to specify IP addresses for C8000s that will connect to
BatteryLab fields; to configure the fields to display in the Results
Panel, to indicate the location for event log; to configure the report
header fields and default printer; to setup the default display
fields, for all graphs
To Next Page
Loading...