Cadex C8000 - Delete a C-Code

C8000 Battery Testing System User Manual
56 2 Battery Tester
Constant Voltage charge (Unit (V))
(SLA/LiPH only)
CTP
End of Charge point for a battery charge
(Unit (A)) (SLA/Li/LiPH only)
Min Voltage
The minimal voltage the C8 allows
before terminating action (Unit (VV))
Max Voltage
The maximum voltage the C8 allows
before terminating action (Unit (VV)
Chrg Timeout
The maximum length of time that a
Charge current can be applied before
terminating (Unit (C-minutes))
Dchrg Timeout
The maximum length of time that a
Discharge current can be applied before
terminating (Unit (C-minutes))
Max Chrg Curr
The maximum allowable Charge current
allowed to be applied to the battery
before terminating (Unit (AA))
Max Dchrg Curr
The maximum allowable discharge
current allowed to be applied to the
battery before terminating (Unit (AA))
Max Temp
The maximum allowable temperature
allowed before terminating (Unit (°C))
2.8.1.3 Delete a C-Code
To delete a c-code, select the c-code to delete and press DELETE.
The Confirm Action screen appears.
Press OK to delete the c-code.