Cadex C8000 - Configure the C8000; Set up the C8000; User Maintenance for the C8000; User Maintenance Warnings

C8000 Battery Testing System User Manual
30 2 Battery Tester
2.5 Configure the C8000
2.5.1 Set Up the C8000
To set up and configure the C8000 perform the following steps:
1. Plug in the power cord and ensure the battery adapter cords
are properly connected to the C8000.
2. Switch ON the C8000 set the clock and enters user information.
For instructions, see 2.11.1 Set the Clock and 2.11.2 User
Information.
3. If required, use LCD Settings to adjust the contrast of the LCD
display. See 2.11.3 LCD Settings for more information.
2.6 User Maintenance for the C8000
2.6.1 User Maintenance Warnings
Warning
There are no internal user-serviceable parts in the
C8000 other than the internal backup battery.
Except for changing the battery, unauthorized
disassembly and/or repair of the C8000 by anyone
other than an authorized Cadex Service Center may
cause a risk of injury or death and will void the
warranty.
For more information, see 1.1 Cautions and Warnings.