C8000 Battery Testing System User Manual
Battery Tester 35
2.7 The Battery Tester Application
Customizing features not available in standalone:
1. Waveform creation (Waveform revision information only)
2. Custom Programs (Version/Comment/ “I/O” port
configuration only) List feature only.
3. No Graphing or Detail information for Test Results.
(Summary of information only).
4. No Load Capture capabilities.
When you power on the C8000 without any batteries
connected, the Main screen appears: When connected to
BatteryLab, the C8000 displays the Unit # that corresponds
to BatteryLab’s windows.
The Main screen displays six menu items: 2.7.2 Test Results, 2.7.3
Battery Profiles, 2.8 C-Codes, 2.9 Programs, 2.10 Waveforms, and
2.11 Specify System Options.
To Next Page
Loading...