C8000 Battery Testing System User Manual
5 Status Messages 273
5 Status Messages
The following table lists status messages by status code.
The second table lists status messages by detailed message. That
table describes the reason for each type of message and possible
solutions.
5.1 Status Messages Listed by Code
NO BATTERY IS CONNECTED TO THE CHANNEL TERMINAL
A CHARGE CURRENT IS BEING APPLIED
A CHARGE CURRENT IS BEING APPLIED AT A RATE
APPROXIMATELY EQUAL TO THE RATE OF SELF-CHARGE
FOR NiXX, LEAD ACID BATTERIES, OR AT A RATE
PROGRAMMED IN THE C-CODE FOR ALL BATTERY TYPES
IF IN A LOW VOLTAGE CONDITION
FOR NiXX BATTERIES ONLY. DISCHARGING BATTERY TO
THE RECONDITION VOLTAGE PROGRAMMED IN THE C-
CODE
A BATTERY IS CONNECTED TO THE CHANNEL AND
AWAITING SERVICING
NO CURRENT IS ACTIVELY BEING APPLIED TO THE
BATTERY THROUGH THE BATTERY PORTS. ONLY THE
AUXILLIARY PORTS ARE ACTIVE
A DISCHARGE CURRENT IS BEING APPLIED TO THE
CONNECTED BATTERY
NO BATTERY SERVICING IS OCCURRING. PROGRAM IS
WAITING FOR A TEST CONDITION TO BE MET. DEFAULT
ACTION IS TO END STEP
To Next Page
Loading...