Cadex C8000 - Page 39

C8000 Battery Testing System User Manual
Battery Tester 27
Battery Compatibilty
 Chemistries
All Standard Battery Types
 Lead Acid
 Ni-based: NiMH, NiCd
 Li-based: Li-ion, Li-Phosphate
 Capacity Range
50mAh to 1000Ah
Electrical
 Input Power
 100-240 VAC
 50-60 Hz
 Battery Voltage Range
Nominal 1.2V-36V (max 45V) supports serial
connection of:
 Up to 10 Li-ion cells (3.6V/cell)
 Up to 18 Lead Acid cells (2.0V/cell)
 Up to 30 Nickel-based cells (1.2V/cell)
 Maximum Charge Power
100W per channel = 400W total
 Maximum Discharge Power
80W per channel = 320W total
Dual Power Port cable may be to increase the
maximum Power Rate to 160W per channel pair
External Load may be used to increase
Discharge Rate up to 2400W
 Maximum Charge/Discharge
Current
30mA to 10A set in 1mA increments
Dual Power Port cable may be to increase the
maximum Discharge Rate to 20A per channel
pair
External Load may be used to increase
Discharge Rate up to 240A
 Output Frequency
Square 2 kHz (500 microseconds)
 C8000 Accuracy
 Voltage = 0.1% full scale
 Current = 0.25% full scale
Other Specifications
 Power Management
Current automatically scaled down if power
limits are exceeded – message indicates scaled
test
 Charge Methods
Charge methods are dependent upon chemistry:
 Li-ion + Lead Acid = constant current/