COPYRIGHT
©
2001 CANON INC.
2000 2000 2000 2000
CANON CLC5000 REV.0 JAN. 2001
SERVICE MODE
S-48
LOOP-MB
*1
Changes the processing method used to read images into memory for color-
ing in area specification/color creation.
If the value is increased, filling gaps will be easier; too high a value, how-
ever, will result in bleeding.
Settings range
0~3
(Standard: 0)
LOOP-TH
*1
If the slice level adjustment value is increased for binarization used for
reading images into memory for area specification/color creation, finer lines
may be read.
Settings range
0~255
(Standard: 0)
Note 1: You must enter the appropriate value whenever you have replaced a PCB or
initialized a RAM; record any new values on the service label for this pur-
pose.
To Next Page