Canon E1 - Page 41

Related Service Mode
• Clearing of Deck alarm:
COPIER> FUNCTION> CLEAR> DK-RCV
• Clearing of Secondary Deck alarm:
COPIER> FUNCTION> CLEAR> DK2-RCV
<Use case>
• At recovery from descent timeout alarm
Related alarm code
• 04-3101/3201/3301: Deck Lifter descent alarm 1 (Upper/Middle/Lower)
• 04-3102/3202/3302: Deck Lifter descent alarm 2 (Upper/Middle/Lower)
• 04-3103/3203/3303: Deck Lifter descent alarm 3 (Upper/Middle/Lower)
• 04-3181/3281/3381: Secondary Deck Lifter descent alarm 1 (Upper/Middle/Lower)
• 04-3182/3282/3382: Secondary Deck Lifter descent alarm 2 (Upper/Middle/Lower)
• 04-3183/3283/3383: Secondary Deck Lifter descent alarm 3 (Upper/Middle/Lower)
CAUTION:
When deck lifter descent alarm occurred, execute service mode: COPIER> FUNCTION> CLEAR> DK-RCV/DK2-RCV and
clear the alarm.
● Foreign Substance Detection
In the case that small-size paper has been set on the Deck and the lifter goes up with foreign matters or paper remained in the
space, these foreign matters may reach the upper limit before the Paper Surface Sensor (S106/S206/S306) detects the paper.
When this happens, the deck will be damaged as the lifter continues to move upward. The Foreign Substance Sensor (S101/
S201/S301) detects foreign matters and controls the lifter's upward movement.
NOTE:
Lifter failure control is performed in the same manner for all decks.
Paper Surface Sensor
(S106/ S206/ S306)
Lifter Upper Limit Sensor
(S109/ S208/ S308)
Lifter Lower Limit Switch
(SW102/ SW202/ SW302)
Deck Foreign Substance Sensor
(S101/ S201/ S301)
Deck Foreign Substance
Sensor Flag
Lifter Lower Limit Sensor
(S111/ S211/ S311)
2. Technology
33