● When loading envelopes or paper with a logo, see Loading Envelopes(P. 154) or Loading Preprinted
Paper(P. 157) .
»
Continue to Specifying Paper Size and Type in the Multi-Purpose Tray(P. 162)
Printing on the Back Side of Printed Paper (Manual 2-Sided Printing)
● You can print on the back side of printed paper. Flatten any curls on the printed paper and insert it into the
paper drawer ( Loading Paper in the Paper Drawer(P. 141) ) or manual feed slot, with the side to print
face up (previously printed side face down).
- You can use only the paper printed with this machine.
- You cannot print on the side that has previously been printed on.
- If the printouts look faded, set the target paper source to <On> in <Manual Back Side Print (2-Sided Only)>.
<Manual Back Side Print (2-Sided Only)>(P. 472)
- If you are using A5 size paper, the reverse side may not be printed correctly.
LINKS
Available Paper(P. 701)
Basic Operations
153
To Next Page
Loading...
