<Fine Adjust>
<Yellow>/<Magenta>/<Cyan>/<Black>
<High>/<Medium>/<Low>
17 Levels
<Menu>
<Function Settings>
<Printer>
<Printer Settings>
<Print
Quality>
<Density>
Adjust the density of each color
<Apply>
● You can use <Fine Adjust> to adjust the toner density of each color to three density levels: high
density, medium density, and low density.
● When <Toner Save> is set to <On>, you cannot set this item.
<Toner Save>
You can save toner consumption. Select <On> when you want to check the layout or other appearance
characteristics before proceeding to nal printing of a large job.
<Off>
<On>
<Menu>
<Function Settings>
<Printer>
<Printer Settings>
<Print Quality>
<Toner
Save> Select <Off> or <On>
<Gradation>
Specify the processing method used to reproduce gradation. <High 2> gives ner gradation than <High 1>.
<High 1>
<High 2>
<Menu>
<Function Settings>
<Printer>
<Printer Settings>
<Print
Quality> <Gradation> Select <High 1> or <High 2>
● This setting is only available when <Resolution> is set to <600 dpi>.
<Density Fine Adjustment>
When ne lines or small text are faded, increase the density to give less faded print.
Five Levels
Setting Menu List
496
To Next Page
Loading...
