Canon imageCLASS MF735Cdw - Page 509

<Menu> <Function Settings> <Printer> <Printer Settings> <Print Quality> <Gradation
Smoothing> <Gradation Smoothing> Select the item
<Apply to Graphics> *1
Specify whether to apply smoothing processing to graphics when <Gradation Smoothing> is set to <Level
1> or <Level 2>.
<Off>
<On>
<Menu> <Function Settings> <Printer> <Printer Settings> <Print Quality> <Gradation
Smoothing> <Apply to Graphics> Select <Off> or <On>
<Apply to Images> *1
Specify whether to apply smoothing processing to images when <Gradation Smoothing> is set to <Level
1> or <Level 2>.
<Off>
<On>
<Menu> <Function Settings> <Printer> <Printer Settings> <Print Quality> <Gradation
Smoothing> <Apply to Images> Select <Off> or <On>
● [Gradation Smoothing] in the printer driver applies only to graphics data. The setting congured here
applies to smoothing processing for image data.
<Layout>
Specify the page layout settings such as binding position and margin values.
<Binding Location>
If you are binding the printouts with a binding tool such as a stapler, use this item to specify whether to bind
on the long or short edge. Specify the setting of this item in combination with <Gutter>, which species the
binding margin to apply to the binding position.
<Long Edge>
<Short Edge>
<Menu> <Function Settings> <Printer> <Printer Settings> <Layout> <Binding
Location> Select <Long Edge> or <Short Edge>
Setting Menu List
501