Diagnostic Procedure
1.
CHECK SHIFT POSITION SENSOR SIGNAL
• With the scan tool, select view DTC and data
stream for AMT.
• Start vehicle and monitor the value of 9SHIFT
POSITION9.
GEAR CONDITION DISPLAY VALUE
1st
Vehicle is driving OK
2nd
3rd
4th
5th
Is the check result normal?
Yes
>> The conditions that caused this DTC to set are not present at this time (See Diagnostic Help in Section
08 Transaxle).
No
>> Go to the next step.
DIAGNOSIS & TESTING
PZSMD080031T
08
08–87
Chery Automobile Co., Ltd.
To Next Page
Loading...
