26. Remove the power steering pump pressure pipe
(1) and return hose clamp (2).
27. Remove the A/C compressor line bolt (1) from the
A/C compressor.
(Tighten: A/C compressor line bolts to 20 ± 5 N·m)
NOTE: After removing the A/C lines, plug the A/C
lines to prevent any debris from entering the A/C
system.
28. Raise and support the vehicle.
29. Drain the engine oil.
30. Remove the exhaust pipe assembly (See Exhaust Pipe Assembly Removal & Installation in Section 07 Exhaust).
31. Remove the suction line retaining bolts on the front sub-frame.
ON-VEHICLE SERVICE
PZSM110006
PZSM130003
02
02–37
Chery Automobile Co., Ltd.