4-54 Model D9854 Advanced Program Receiver Installation and Operation Guide 4021470 Rev D
Setup Menu: Services, Continued
Select Language By
Description: This is used to select the language type to display the subtitles.
Parameters: Language List, Language Entry, and PMT Order. The default
setting is Language List. Language Entry and Language PMT Order
are more applicable for advanced applications. The following table
describes each of the available options and how to set them.
Language List
Description: Select the language from the Language List by toggling through the
available selections. If Language List is selected, PMT Order and
Entry fields are not used.
Select Language By Option Description
Language List Each subtitling PID can contain
multiple languages. Use this
setting to select the language from
the Language List by toggling
through the available selections. If
Language List is selected, PMT
Order and Entry fields are not
used.
Language Entry Use this setting with Entry to
directly enter the language code
when the language you want is
not in the list. In this case enter
the three-character code provided
by your uplink service provider
under Entry using the numeric
keypad (e.g., eng for English).
PMT Order Use this setting to select one of up
to eight languages as assigned in
the PMT for the tuned channel on
the receiver. Toggle through the
PMT Order to select the correct
language within the order (i.e.,
First to Eighth), available from
your uplink service provider.
To Next Page
Loading...
Need help?
General
