Cisco D9854 User Manual

4-4 Model D9854 Advanced Program Receiver Installation and Operation Guide 4021470 Rev D
Keypad Convention
Overview
Throughout this manual, there are references to parts of a
keypad on the front of the receiver. This is the Navigation/
Selection keypad (see diagram at right), which changes its
function, depending on the current state of the menu. For
clarity, the following table shows which parts of this integral
interface are being referenced by which term.
Button Description Function
1 SELECT Runs the highlighted command or opens the
highlighted menu.
2 LEFT arrow When moving through menus, highlights the
menu item to the left. When entering data,
moves the cursor to the left. In some menus,
backspaces over the data entry.
3 UP arrow Highlights the menu item above.
4 RIGHT arrow When moving through menus, highlights the
menu item to the right. When entering data,
moves the cursor to the right.
5 DOWN arrow Highlights the menu item below.

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C