4-14 Model D9854 Advanced Program Receiver Installation and Operation Guide 4021470 Rev D
Status Menu
Structure
To view the Status menu from the Main menu, press the SELECT key. The Status
menu indicates the status of the input and output signals, the video and audio
services, and allows you to browse and/or configure the alarms and warnings.
The Status menu is split into four parts; General, Services, TS Input and TS Output.
Each parameter is described in this section. For instructions on how to select and
store settings, see About the Front Panel, page 4-2.
The Status menu has the following structure:
Input Status
General Status
Alarms Warnings Browse Clear All
0 0
i
Warning Set on 2007/02/09 10:01:05
Loss of Signal
i
AFC(MHz) UEC CEC Clear Counts
1234 0 0 No
i
C/N(dB) C/N Margin(dB)
19.3 12.0
i
PER PVBER LDPCBER
0 0.00e-6 n/a
i
LNB Stat
N/A
i
SymRate FEC Modulation IQ Pol
30.5001 Auto DVB-S2 NonInv H
i
Dnlk Freq(GHz) L-Band Pilot Present
15.000000 1640.0 Yes
i
Video Rate (Mbps)
H.264 HD1080i/3000 10.991234
i
PE CA System
PE16 SA
i
Input Status Rate(Mbps) Level(dBm)
RF1 Lock+Sig 68.987654 100
i
NetName NetID TxID
x 3 301
i
Input Status Rate(Mbps) Level(dBm)
RF1 Lock+Sig 68.987 100
i
Polar LO Select
Off Off
i
Video Status
Video Rate (Mbps)
H.264 HD1080i/3000 10.9912
i
3:2 Pulldown FPS
Recent 29.997
i
Stream AR Act Conv
221:100 16:9 F/W
i
AUD Format BR(kbps) Buffer SFR(Hz)
1 HE-ACC 384 7250 48000
i
Main:Status
General Services TS Input TS Output
i
s
Main:Status:Services
Video Audio
i
s
Audio Status
Main:Status:TS Input
Input Program PIDs Program Status
i
s
PE Stream Detail PID Present
PE1 <SUBT1 MPG2 VID 8191 Yes
i
Program PIDs
Main:Status:TS Output
Output
i
s
Output Rate(Mbps) Free(Mbps)
MOIP1 49.999999 25.999999
i
Output Status
ASI Link Transport Packet Size
Error Error n /a
i
SR Event Start
2008/08/27 10:34:18
i
SR Event End
2008/08/27 10:48:01
i
PE SR Status SR Event Type
PE1 Primary None
i
Program Status
PE Mode Auth Enc Scr
PE16 BISS1 Y Yes Yes
i
To Next Page
Loading...
Need help?
General
