Cisco D9854 User Manual

4021470 Rev D Model D9854 Advanced Program Receiver Installation and Operation Guide 6-1
Chapter 6
Service and Maintenance
Overview
Introduction
This chapter gives information to assist you in upgrading firmware to the D9854
Advanced Program Receiver. It also describes how the status of the D9854 receiver
is communicated via front panel LEDs.
In This Chapter
This chapter contains the following topics.
Topic See Page
Section A - Front Panel LEDs 6-2
Introduction 6-2
Messages 6-3
Section B - Power Supply Replacement 6-22
Introduction 6-22

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C