Cisco D9854 User Manual

4021470 Rev D D9854 Advanced Program Receiver Installation and Operation Guide 5-5
Tab Pages
Tab Pages
The GUI of the D9854 has a number of tab pages.
The function for the tab pages is as follows:
• Summary
From this page you can obtain an overview of the D9854 operation.
•Status
From this page you can view detailed input status, video status and CA system
status.
•Setup
From this page you can:
- configure the TS input and output,
-set custom tuning,
- configure program entries,
-set up BISS,
- configure CI (Common Interface) settings,
- set the cueing parameters,
- set up services,
- set up alarms and warnings,
- configure muting thresholds,
- configure user settings.
•System
From this page you can:
- view alarm and warning status information,
- set up and view backup and restore controls,
- configure ethernet ports,
- view the operating temperatures,
- configure trap destinations,
- view factory loaded application version number.
•Diagnostics
- view PSI Tables,
- view Frequency and Channel tables,
- view alarm and warning history information,
- view logs.

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C