Cisco D9854 - Set up for Network Connection

4021470 Rev D D9854 Advanced Program Receiver Installation and Operation Guide 1-3
Set up for Network Connection
1. Press MENU to display the Main menu.
2. Press
! to go to the Setup menu. Press SELECT. Press ! to go to the IP menu.
Press SELECT.
3. Use the
"# arrow keys to navigate up and down the IP menu, and the $!
arrow keys to move across the IP menu to set the IP Address, Mask and
Gateway parameters. Use the number keys to directly enter numbers in the
fields. For more information on keypad operation, see Front Panel Controls &
Display.
4. Press SELECT each time to save the changes. Press MENU four times to return
to the startup screen.