Cisco D9854 User Manual

5-80 Model D9854 Advanced Program Receiver Installation and Operation Guide 4021470 Rev D
Viewing the PSI Channels
To View the PSI Channels
Proceed as follows to view the PSI Channels table:
From the user interface of the D9854, click Diagnostics tab, and then the PSI
Channels icon from the sub-page.
You cannot make any changes in the PSI Channels table and can only view the
available channels and their settings. The following is a list of the various columns:
Abbreviation Description
Service ID Virtual Channel
Transport Stream ID Transport ID
PMT PID Program Map Table PID
ECM PID Entitlement Control Message PID
Program Name Name of the program

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C