3-6 Model D9854 Advanced Program Receiver Installation and Operation Guide 4021470 Rev D
Section B - Rear Connector Panel
Overview
D9854 Receiver Rear Connector Panel
The following diagrams show the rear connector panel so the two D9854 receiver
models available, Base and SDI with SD/HD-SDI and AES outputs.
Base Model
SDI Model, with SD/HD-SDI and AES outputs
Connectors
The following table describes the function and type of the various connectors.
Connector Function Connector Type
RF Inputs Each input accepts an LNB signal
input. RF1 provides LNB power for
use when no external LNB power
source is available. RF2 to R4 require
an external LNB power source.
F
ASI Input Asynchronous Serial Interface Input. BNC
To Next Page
Loading...
