Cisco D9854 User Manual

3-12 Model D9854 Advanced Program Receiver Installation and Operation Guide 4021470 Rev D
Connecting the ASI Output
To Connect the ASI Output
Do as follows to connect to the ASI output:
1. Connect the output signal from the D9854 receiver ASI OUT connector.
Use a Belden “Brilliance” cable with foil/braid construction. The shield must
provide 99% or better shielding effectiveness.
The equipment after the D9854 receiver could be a Model D9887 HDTV
Receiver.

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C