Cisco D9854 User Manual

4021470 Rev D D9854 Advanced Program Receiver Installation and Operation Guide 5-81
Viewing the PSI Tables
To View the PSI Tables
Proceed as follows to view the PSI tables:
From the user interface of the D9854, click Diagnostics tab, and then the PSI Tables
icon from the sub-page.
You cannot make any changes in the PSI table and can only view the PSI tables
received and their settings. The following is a list of the various columns:
Abbreviation Description
Table Type Table Type (i.e., NIT, PMT, etc.)
Table ID Extension MPEG/DVB Table ID
Status Reception Status
Version Table Version number
PID Program PID number
Number of Sections PSI tables are received in sections. This indicates the
section number received. This information is useful
for diagnostics/troubleshooting purposes.

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C