2-2 Model D9854 Advanced Program Receiver Installation and Operation Guide 4021470 Rev D
D9854 Advanced Program Receiver
General Description
The Model D9854 Advanced Program Receiver is designed for satellite content
distribution applications requiring DVB-S and DVB-S2 reception capabilities with
advanced digital outputs for digital tier program distribution. A built-in decoder
will be capable of decoding a MPEG-2 or MPEG-4 High Definition (HD) program
for analog monitoring or high-quality HD-SDI output version will be available for
re-encode applications.
The ASI transport output or the optional MPEGoIP output will provide a number of
output modes including the capability of carrying a decrypted program for digital
tier distribution. This helps ensure that compressed video programs are efficiently
distributed to households equipped with digital set-top boxes. Digital Program
Insertion (DPI) information will also be available along with the video and audio
PIDs (Packet Identifiers) for external ad insertion in compressed digital format.
Key Features
The D9854 receiver provides the following key features:
• Four L-Band inputs
• DVB-S QPSK demodulation
• DVB-S2 QPSK/8PSK demodulation
• PowerVu® conditional access with DES or DVB descrambling
• Supports Basic Interoperable Scrambling System (BISS) conditional access
• 4:2:0 High Definition MPEG-4 AVC and MPEG-2 1080i and 720p decoding
• 4:2:0 MPEG-2 Standard Definition and MPEG-4 AVC decoding
• Aspect ratio conversion (4:3, 16:9, 14:9) with Active Format Descriptor (AFD)
control for SD programs
• AFD support for down-conversion of HD programs with aspect ratio conversion
• Closed Captioning support for EIA-608 and EIA-708
• MPEG & Dolby® Digital (AC-3) audio decoding
• Four audio outputs providing either two stereo pairs (four mono channels) of
balanced audio each with the ability to use part of their output for applications
such as SAP, cue tones, etc.
• Web browser interface for easy setup, control and monitoring
• DVB-VBI and SCTE 127 support
• DVB-CI support for CAM-based conditional access
• DTMF cue tone & cue trigger outputs for ad-insertion
• Digital Program Mapping providing uplink control for service replacements in
blackout areas
• Utility data up to 38.4 kbps via RS-232
• Field upgradeable software and security
• Front panel LCD and keypad for monitoring and control
• Multiprotocol Encapsulation (MPE) output
To Next Page
Loading...
Need help?
General
