Cisco D9854 User Manual

4021470 Rev D D9854 Advanced Program Receiver Installation and Operation Guide 5-77
Viewing License Information
To View the License Information
Proceed as follows to view the Base License information:
From the user interface of the D9854, click the System tab, and then Base License
icon from the sub-page.
The Base License page displays a list of software licenses for the D9854 Advanced
Program Receiver and whether each of the software licenses are enabled or
disabled.
Note: All software licenses are enabled for this release (temporarily). Any of these
required licenses will need to be purchased from Cisco in subsequent software
releases.

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C