Cisco D9854 User Manual

4021470 Rev D D9854 Advanced Program Receiver Installation and Operation Guide 2-3
D9854 Advanced Program Receiver, Continued
Optional Features
The following features are available options:
• MPEGoIP output only available on the Digital Transport Model
• User-switchable redundant ASI outputs or SDI or HD-SDI outputs
• SD or HD-SDI video output with embedded audio
• AES-3id digital audio output
Software Update
All software in the D9854 receiver is stored in non-volatile memory that can be
electrically programmed. New software releases for the D9854 receiver can be
downloaded via the Ethernet 10/100/1000 BaseT Management interface.

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C